- Connects solar panels with solder-pad terminals to the solar input of the MR2
- JST-PH 2.0 socket on the board side, bare, stripped and tinned wire ends on the panel side
- 2-pin, 20 cm long
Description
Solar connection cable for the Inhero MR2 – connects a solar panel with solder-pad terminals to the solar input of the MR2. The bare ends are soldered to the panel's solder pads; the JST-PH socket plugs in on the board side.
Technical specifications
- Connector: JST-PH 2.0, 2-pin, socket (2.0 mm pitch)
- Length: 20 cm
- Wire ends: bare, stripped and tinned
- Compatible with: Inhero MR2 (solar input) and any solar panel with solder-pad terminals
What's in the box
- 1× solar connection cable, 20 cm
⚠ Important note
The MR2 has no hardware reverse-polarity protection on the solar input. Reversed polarity causes immediate, irreversible damage to the board. Check polarity before connecting for the first time.
Manufacturer Information (GPSR)
Inhero GmbH, Gewerbestraße 19, 08115 Lichtentanne, Germany · info@inhero.de